HOTLINE

0918.844.870 Ms. An

Máy Đo độ Nhớt Động Học Bể Kép CAV® 4.2 Cannon

(21 đánh giá)

Mỹ

Máy đo độ nhớt để bàn CAV 4.2, bể kép, hoàn toàn tự động với 2 bộ xử lý mẫu 14 vị trí để xử lý mẫu D445.

Ứng dụng phân tích dầu công thức, dầu thủy lực, gốc dầu, nhiên liệu hàng hải, phụ gia...

Ms. An 0918 844 870

D445 precision in a modern, dependable design:

  • Temperature range: ambient to 100 °C (15 °C to 150 °C with available bath options)
  • Viscosity range: 0.5 mm²/s (cSt) to 10,000 mm²/s (cSt) in 100-fold increments* (easily covering the range of 5 separate manual glass viscometers)
  • Dual, independent baths enable simultaneous testing at two different temperatures
  • Two fully accessible, 14-position sample handlers ensure reliable, unattended processing of up to 24 determinations per hour
  • Automation provides an alternative to labor-intensive manual testing and reduces operator to operator variability
  • A well tested CANNON viscometer platform offers reliability and dependable support

SPECIFICATIONS

UNIT WEIGHT 63.0 kg (140.0 lb)
METHOD ASTM D445/D446, IP 71, ISO 3104/3105, SAE J300
DIMENSIONS (W X D X H) 36.0 cm × 66.0 cm × 72.0 cm (14.3 in × 26.0 in × 28.5 in)
SHIPPING DIMENSIONS (W X D X H) 81.3 cm × 53.3 cm × 99.0 cm (32.0 in × 21.0 in × 39.0 in)
SHIPPING WEIGHT (WITH ALL ITEMS) 96.6 kg (213.0 lb)
MAXIMUM THROUGHPUT 24 tests per hour
SAMPLE CAPACITY 28 positions (2 x 14 positions), automated
VISCOSITY RANGE 0.5 mm²/s (cSt) to 10,000 mm²/s (cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available.
TIMING RESOLUTION 0.01 s (timing accuracy to ± 0.001 s)
TEMPERATURE RANGE AND ACCURACY

15 °C to 100 °C,± 0.01 °C (temperatures within 5 °C of ambient and below require bath cooling)
Up to 150 °C,± 0.03 °C (with high temperature bath

MINIMUM SAMPLE/SOLVENT VOLUME 8 mL sample (as little as 3 mL with fast run tubes)/15 mL solvent per test
OPERATING CONDITIONS 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing),Installation Category II; Pollution Degree 2
ELECTRICAL SPECIFICATIONS 100 Vac, 50/60 Hz; 115 Vac, 50/60 Hz; 230 Vac, 50/60 Hz; 1200 watts power consumption
COMPLIANCE CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc,60 sec.); ROHS
ADDITIONAL STANDARD FEATURES Internal heated waste drain lines,dual solvent input
DATA OUTPUT USB

Đánh giá sản phẩm

Bình chọn sản phẩm:

Sản phẩm cùng loại

Top